|
Channel Master 1007A Satellite Dish Signal Meter 1007-A LNB Voltage TV Video Level Strength Tester with Switchable Output and Battery Charger, 950 - 2150 MHz, Part # 1007-A
The 1007IFD satellite signal meter has been designed for the installation and maintenance of a satellite TV system. It features signal strength measurement by both meter indication and audible tone indication for dish antenna peaking. LNB voltage and current measurement is also provided. An internal, rechargeable nicad battery pack with output switchable between 13V, 18V, 13V/22KHz and 18V/22KHz allows a dish antenna to be installed prior to installation of the satellite receiver. The output voltage and 22KHz tone presence from a satellite receiver may also be monitored. The internal 22KHz generator allows "alternate satellite" selection on certain types of systems with an integrated LNB/multiswitch. A 117 VAC wall plug type charger is included.
TECHNICAL SPECIFICATIONS
-
Insertion Loss 4dB
-
Dimensions H x W x D 3.5” x 6.0” x 4.5” (89 x 152 x 114 mm)
-
Weight 36 oz. (1032g) -
Acoustic Indicator 0.2 to 5.0KHz
-
LNB Current Measurement 0-500mA
-
Wall Plug Charger Output 24VDC at 100 mA conn. center positive
-
Tone Output 0.6V square wave, 22KHz
-
Tone Indicator Requires >300mV, 18-24KHz
-
Indication Analog Panel Meter 100uA FSD
-
Sensitivity (per transponder) -32 to +4 dBm 1 transponder
-
Battery Life 3 hours between charges at 170 mA LNB current
-
Nicad Battery Pack Output 13V, 18V, 13V/22KHz, 18V/22KHz
-
Frequency range 950-2150MHz
-
-44 to -8 dBm 16 transponders
-
LNB Voltage Measurement 0-25VDC
-
RF Connectors Type F female
-
-41 to -5 dBm 8 transponders
-
Impedance 75 ohm
-
Charge power/time 24VDC at 60 mA for 12 hours
Retail Price: $159.95
Our Discounted Price: $94.95
Qty: 
|
