Channel Master CM-1007A Single Signal Meter 22KHz Tone Powered by Receiver or Battery Power Pack Peaking Unit Satellite Dish Signal Meter LNB Voltage Level Strength Tester, 950 - 2150 MHz, Part # CM1007A

The 1007IFD satellite signal meter has been designed for the installation and maintenance of a satellite TV system. It features signal strength measurement by both meter indication and audible tone indication for dish antenna peaking. LNB voltage and current measurement is also provided. An internal, rechargeable nicad battery pack with output switchable between 13V, 18V, 13V/22KHz and 18V/22KHz allows a dish antenna to be installed prior to installation of the satellite receiver. The output voltage and 22KHz tone presence from a satellite receiver may also be monitored. The internal 22KHz generator allows "alternate satellite" selection on certain types of systems with an integrated LNB/multiswitch. A 117 VAC wall plug type charger is included.

TECHNICAL SPECIFICATIONS

• Indication Analog Panel Meter 100uA FSD
• LNB Current Measurement 0-500mA
• -41 to -5 dBm 8 transponders
• LNB Voltage Measurement 0-25VDC
• Tone Indicator Requires >300mV, 18-24KHz
• Wall Plug Charger Output 24VDC at 100 mA conn. center positive
• Acoustic Indicator 0.2 to 5.0KHz
• -44 to -8 dBm 16 transponders
• Dimensions H x W x D 3.5” x 6.0” x 4.5” (89 x 152 x 114 mm)
• Battery Life 3 hours between charges at 170 mA LNB current
• Sensitivity (per transponder) -32 to +4 dBm 1 transponder
• Weight 36 oz. (1032g)
• Impedance 75 ohm
• Insertion Loss 4dB
• Nicad Battery Pack Output 13V, 18V, 13V/22KHz, 18V/22KHz
• Charge power/time 24VDC at 60 mA for 12 hours
• Tone Output 0.6V square wave, 22KHz
• RF Connectors Type F female
• Frequency range 950-2150MHz

Qty: