Channel Master 1007IFD Satellite Signal Level Meter Dish 1007-IFD LNB Voltage TV Video Strength Tester with Switchable Output and Battery Charger, 950 - 2150 MHz, Part # 1007-IFD

The 1007IFD satellite signal meter has been designed for the installation and maintenance of a satellite TV system. It features signal strength measurement by both meter indication and audible tone indication for dish antenna peaking. LNB voltage and current measurement is also provided. An internal, rechargeable nicad battery pack with output switchable between 13V, 18V, 13V/22KHz and 18V/22KHz allows a dish antenna to be installed prior to installation of the satellite receiver. The output voltage and 22KHz tone presence from a satellite receiver may also be monitored. The internal 22KHz generator allows "alternate satellite" selection on certain types of systems with an integrated LNB/multiswitch. A 117 VAC wall plug type charger is included.

TECHNICAL SPECIFICATIONS

• Tone Indicator Requires >300mV, 18-24KHz
• RF Connectors Type F female
• Acoustic Indicator 0.2 to 5.0KHz
• LNB Voltage Measurement 0-25VDC
• Battery Life 3 hours between charges at 170 mA LNB current
• LNB Current Measurement 0-500mA
• Insertion Loss 4dB
• Wall Plug Charger Output 24VDC at 100 mA conn. center positive
• Impedance 75 ohm
• Nicad Battery Pack Output 13V, 18V, 13V/22KHz, 18V/22KHz
• -41 to -5 dBm 8 transponders
• Dimensions H x W x D 3.5” x 6.0” x 4.5” (89 x 152 x 114 mm)
• Weight 36 oz. (1032g)
• -44 to -8 dBm 16 transponders
• Frequency range 950-2150MHz
• Tone Output 0.6V square wave, 22KHz
• Sensitivity (per transponder) -32 to +4 dBm 1 transponder
• Indication Analog Panel Meter 100uA FSD
• Charge power/time 24VDC at 60 mA for 12 hours

Retail Price: $159.95

Qty: