DIRECTV Pro Grade Commercial 6328IFD 3X8 IF Multiswitch with 120V to 24VDC Power Supply Active UHF/VHF Input 5 dB Amplified 8 Satellite Distribution LNB 950 - 2050 MHz In-line IF Combiner, Part # CM6328-IFD
This product is no longer available for purchase.
It has been replaced by the Channel Master 6228IFD Multi-Switch!!!!
Channel Master - A Name You Can Trust!!!
These multiswitches are used to provide satellite signals of either RHCP or LHCP polarization from one dish at four or eight locations. In addition, when required, they provide terrestrial VHF/UHF signals diplexed on the same coaxial cable.
Model 6328IFD combine VHF/UHF (54-806 MHz) signals with satellite IF signals on one cable to provide up to eight independently switchable wideband outputs.They should be used with a masthead preamplifier or MATV amplifier when all desired VHF/UHF TV signals can be received at comparable levels from a stationary antenna or antenna system, or with a channelized MATV system when this is not the case. Passive VHF/UHF processing allows complete flexibility for VHF/UHF amplification.
- 8014IFD 120 VAC / 24 VDC Power Supply Included
- 3 Inputs / 8 Outputs
- Impedance: 75 Ohm (Female F Connector)
- High Performance 3x8 Satellite Multiswitch
- Commercial Grade
Satellite IF Port:
- Frequency Range: 950-2050 MHz
- Insertion Loss: 3 dB
- Noise Figure: 7 dB
- Isolation-Cross Polarization: 35
- Maximum Input (dBm, Per Transponder) 16 Transponders, -35 dBc IMD: -25 dBc
- Frequency Range: 54-806 MHz
- Gain: 1 dB
- Noise Figure: 5 dB
- Maximum Input (dBm, Per Transponder) 8 Channels, -46 dB x Mod: 20 dBmV
Optional Power Supply:
Retail Price: $54.95
Our Discounted Price: $13.95