Nextwave Satellite Dish Receiver NCC-500 Navigator C-Band, IRD Integrated IR Decoder Frame Controller, KU 950 - 1450 MHz, Part # NCC500

Nextwave Satellite Dish Receiver NCC-500 Navigator C-Band, IRD Integrated IR Decoder Frame Controller, KU 950 - 1450 MHz, Part # NCC500

The Navigator NCC500 represents the perfect combination of quality, features and price. The sleek new case design disguises a workhorse receiver with a surprising list of features. Comes with IRD: this unit is an Integrated Receiver Decoder which controls your dish movement, servo motor with IR remote control, with built-in case for a video crimper module which is not included. With this unit you can get all your free satellite programming with ease!

Fully programmable for all satellites. Comes with built-in extras you wouldn't expect to find from a receiver in this price range:

• Built-in Receiver and Decoder
• Formatted Stereo
• Customizable Satellite Name Selection
• LNBF switching
• Favorite Channel Memory with Parental lockout
• Serial Port to let you add on an electronic program guide system
• Supports C/KU or V/H switch
• Not intended for use with DIRECTV or Dish Network Satellite Systems
• Video Cipher Module Not Included
• Easy to Install!

Why repair your old C-Band Receiver, when you can get a new one for less then what you would pay to have it serviced!

Specifications:

• RF/IF:
  • RF Input Frequency: 950 - 1450 MHz
  • RF Noise Figure: Less than 15 dB
  • RF Input Level: -30 dBm to -60 dBm
  • Second IF: 479.5 MHz
  • IF bandwidth: 27 MHz (3 dB Down) type
  • Image Rejection: Min 30 dB
  • Input Impedance: 75 ohm
  • Static Threshold: 6 dB type, 8 dB Max
  • Input VSWR: 2 type, 3 Max
• Video:
  • Output Level (@ 21.5 MHz p-p Deviation): Level p-p (+/- 0.1v)
  • Output Impedance: 75 Ohm
  • EDS Rejection: More than 40 dB
  • Frequency Response: 50 Hz - 3.58 MHz; +0.5 / -0.7 dB; 3.58 MHz - 4.2 MHz; +1.0 / -1.3 dB
  • S/N @ 14 dB C/N: More than 33 dB
  • Phase: 5 Degrees p-p
  • Field Time Dis.: 5 IRE p-p
  • Line Time Dis.: 5 IRE p-p
  • C/L Gain Inequality: +/- 20%
  • C/L Inter Modulation: +/- 2 IRE
• RF Modulator:
  • Output Channel: USA 3 or 4 UHF
  • Output Impedance: 75 Ohm Unbalanced
  • Output Level: 66.5 dBuV
• Audio:
  • Sub Carrier Frequency: 5.0 - 9.0 MHz
  • Bandwidth: Wide 280 +/- 50 KHz; Narrow 110 +/- 30 KHz
  • Frequency Response (75 KHz Deviation): +/- 3 dB (50 Hz - 15 KHz)
  • De-Emphasis: 75 usec
  • Output level: 1.0 V p-p +/- 3 dB
  • Output Impedance (R/L): 600 Ohm
  • S/N: 6.8 MHz; 35 dB Min
  • Distortion: Less than 2%
• Connectors:
  • IF Input: type F
  • TV Output: type F
  • Antenna Input: type F
  • Video Output: type RCA
  • Audio Output: type RCA
  • Base Band Output: type RCA
  • Polarized Output / External Switch: Mechanical Level type, 4 Pole
  • Actuator Output: Mechanical type, 4 Pole, Spade Terminal
  • External UHF Input: type 1/8 Stereo Jack
  • Serial Interface: type Modular Jack
  • IPPV: type RCA
  • Utility Data: type RCA
• Polarization:
  • LNBF Voltage: 18v / 14v +/- 5%
  • Mechanical: 50 uA
  • Dual Feed Switch: 20 mA
• General Information:
  • Power Requirements: 103.5 VAC - 126 VAC, 60 Hz
  • Dimensions: 14.125 (W) x 14.25 (D) x 3.5 (H)