Philips / Gemini TV Chimney Mount Kit Includes 8 Eye Bolts Nuts 8 Lock Washers 2 10' FT Galvanized Steel Straps Brackets Support Complete Outdoor Off-Air Local Signal Mounting Hardware, Part # PH- 61411

Philips / Gemini TV Chimney Mount Kit Includes 8 Eye Bolts Nuts 8 Lock Washers 2 10' FT Galvanized Steel Straps Brackets Support Complete Outdoor Off-Air Local Signal Mounting Hardware, Part # PH- 61411

Allows you to mount an off-air roof top TV antenna to your chimney!!!

10' FT Chimney Mounting Straps!!!!

Minimum O.D. 1 inch.

Maximum O.D. 1.5 inch.

Tools needed: adjustable wrench or socket set.

Instructions:

1. Assemble straps with factory assembled eye-bolt bracket as shown.
2. Insert an eye-bolt into each bracket and thread nut onto about 1/2" from bolt to end.
3. Put bracket on chimney and run strap round chimney, being careful not to twist it. Install brackets as far apart as possible, 20 % of mast length is suggested.
4. Feed free end of strap through eye-bolt supplied.
5. Pull strap tight around chimney. Be sure the strap is evenly placed around the chimney.
6. Apply strap clamps.
7. Tighten eye-bolt nuts to secure strap around chimney.
8. Install antenna mast. Use guy wire if mast length is excessive.